GanemiX 🧮 Calculator

CC5050 WB Mix Ratio & HardenerCromax Clearcoat

CC5050 WB is a Cromax (Axalta) automotive refinish clearcoat. With hardener XK Activator, the mix ratio is Base 100 : Hardener 37 : Water 10 (by weight).

Mix ratio (by weight)

100 : 37 : 10
Base
CC5050 WB
Hardener
XK Activator
Water
EV Water
Pot life
See the TDS

Weight chart

BaseHardenerWaterTotal
50 g18.5 g5 g73.5 g
100 g37 g10 g147 g
200 g74 g20 g294 g
300 g111 g30 g441 g
500 g185 g50 g735 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 137 g → add water to reach 147 g

🧮 Calculate any amount with this mix

Tips for using CC5050 WB

How to read the ratio and weigh it

The mix for CC5050 WB is "Base 100 : Hardener 37 : Water 10 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 111 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for CC5050 WB is XK Activator. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 18.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of CC5050 WB?

with XK Activator: Base 100 : Hardener 37 : Water 10 (by weight).

Which hardener and thinner does CC5050 WB use?

hardener XK Activator, water EV Water.

How much hardener and thinner do I need for 100 g of CC5050 WB?

XK Activator: 37 g hardener, 10 g water (147 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site