GanemiX 🧮 Calculator

5000F LV CLEAR (Matte) Mix Ratio & HardenerKCC Clearcoat

5000F LV CLEAR (Matte) is a KCC (KCC) automotive refinish clearcoat. With hardener CA421, the mix ratio is Base 100 : Hardener 26 (by weight).

Mix ratio (by weight)

100 : 26
Base
5000F LV CLEAR (Matte)
Hardener
CA421
Thinner
None
Pot life
1.5h

Weight chart

BaseHardenerTotal
50 g13 g63 g
100 g26 g126 g
200 g52 g252 g
300 g78 g378 g
500 g130 g630 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 126 g

🧮 Calculate any amount with this mix

Tips for using 5000F LV CLEAR (Matte)

How to read the ratio and weigh it

The mix for 5000F LV CLEAR (Matte) is "Base 100 : Hardener 26 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 78 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 5000F LV CLEAR (Matte) is CA421. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 1.5h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 13 g. Misreading the hardener by 1 g shifts the hardener amount by about 7.7%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 5000F LV CLEAR (Matte)?

with CA421: Base 100 : Hardener 26 (by weight).

Which hardener and thinner does 5000F LV CLEAR (Matte) use?

hardener CA421, no thinner.

How much hardener and thinner do I need for 100 g of 5000F LV CLEAR (Matte)?

CA421: 26 g hardener (126 g in total).

More KCC Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: KCC official site