GanemiX 🧮 Calculator

5100 LV Plus CLEAR Mix Ratio & HardenerKCC Clearcoat

5100 LV Plus CLEAR is a KCC (KCC) automotive refinish clearcoat. With hardener CA101, the mix ratio is Base 100 : Hardener 10 (by weight).

Mix ratio (by weight)

100 : 10
Base
5100 LV Plus CLEAR
Hardener
CA101
Thinner
None
Pot life
2h

Weight chart

BaseHardenerTotal
50 g5 g55 g
100 g10 g110 g
200 g20 g220 g
300 g30 g330 g
500 g50 g550 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g

🧮 Calculate any amount with this mix

Tips for using 5100 LV Plus CLEAR

How to read the ratio and weigh it

The mix for 5100 LV Plus CLEAR is "Base 100 : Hardener 10 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 30 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 5100 LV Plus CLEAR is CA101. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 2h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 5 g. Misreading the hardener by 1 g shifts the hardener amount by about 20%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 5100 LV Plus CLEAR?

with CA101: Base 100 : Hardener 10 (by weight).

Which hardener and thinner does 5100 LV Plus CLEAR use?

hardener CA101, no thinner.

How much hardener and thinner do I need for 100 g of 5100 LV Plus CLEAR?

CA101: 10 g hardener (110 g in total).

More KCC Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: KCC official site