GanemiX 🧮 Calculator

7500 HS CLEAR Mix Ratio & HardenerKCC Clearcoat

7500 HS CLEAR is a KCC (KCC) automotive refinish clearcoat. With hardener 7500 HS-B, the mix ratio is Base 100 : Hardener 50 : Thinner 2 (by weight).

Mix ratio (by weight)

100 : 50 : 2
Base
7500 HS CLEAR
Hardener
7500 HS-B
Thinner
TH0600
Pot life
1.5h

Weight chart

BaseHardenerThinnerTotal
50 g25 g1 g76 g
100 g50 g2 g152 g
200 g100 g4 g304 g
300 g150 g6 g456 g
500 g250 g10 g760 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 152 g

🧮 Calculate any amount with this mix

Tips for using 7500 HS CLEAR

How to read the ratio and weigh it

The mix for 7500 HS CLEAR is "Base 100 : Hardener 50 : Thinner 2 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 7500 HS CLEAR is 7500 HS-B. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 1.5h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 7500 HS CLEAR?

with 7500 HS-B: Base 100 : Hardener 50 : Thinner 2 (by weight).

Which hardener and thinner does 7500 HS CLEAR use?

hardener 7500 HS-B, thinner TH0600.

How much hardener and thinner do I need for 100 g of 7500 HS CLEAR?

7500 HS-B: 50 g hardener, 2 g thinner (152 g in total).

More KCC Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: KCC official site