GanemiX 🧮 Calculator

5300 HS CLEAR Mix Ratio & HardenerKCC Clearcoat

5300 HS CLEAR is a KCC (KCC) automotive refinish clearcoat. With hardener CA530, the mix ratio is Base 100 : Hardener 34 (by weight).

Mix ratio (by weight)

100 : 34
Base
5300 HS CLEAR
Hardener
CA530
Thinner
None
Pot life
1.5h

Weight chart

BaseHardenerTotal
50 g17 g67 g
100 g34 g134 g
200 g68 g268 g
300 g102 g402 g
500 g170 g670 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 134 g

🧮 Calculate any amount with this mix

Tips for using 5300 HS CLEAR

How to read the ratio and weigh it

The mix for 5300 HS CLEAR is "Base 100 : Hardener 34 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 102 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 5300 HS CLEAR is CA530. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 1.5h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 17 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.9%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 5300 HS CLEAR?

with CA530: Base 100 : Hardener 34 (by weight).

Which hardener and thinner does 5300 HS CLEAR use?

hardener CA530, no thinner.

How much hardener and thinner do I need for 100 g of 5300 HS CLEAR?

CA530: 34 g hardener (134 g in total).

More KCC Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: KCC official site