CC6500 Mix Ratio & HardenerCromax Clearcoat
CC6500 is a Cromax (Axalta) automotive refinish clearcoat. You can choose from 2 hardeners. With hardener AR7505, the mix ratio is Base 100 : Hardener 52 : VOC Agent 13 (by weight).
With hardener AR7505
100 : 52 : 13- Base
- CC6500
- Hardener
- AR7505
- VOC Agent
- AZ9500
- Pot life
- See the TDS
Weight chart
| Base | Hardener | VOC Agent | Total |
|---|---|---|---|
| 50 g | 26 g | 6.5 g | 82.5 g |
| 100 g | 52 g | 13 g | 165 g |
| 200 g | 104 g | 26 g | 330 g |
| 300 g | 156 g | 39 g | 495 g |
| 500 g | 260 g | 65 g | 825 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 152 g → add voc agent to reach 165 g
🧮 Calculate any amount with this mixWith hardener AR7506 Slow
100 : 51 : 14- Base
- CC6500
- Hardener
- AR7506 Slow
- VOC Agent
- AZ9501
- Pot life
- See the TDS
Weight chart
| Base | Hardener | VOC Agent | Total |
|---|---|---|---|
| 50 g | 25.5 g | 7 g | 82.5 g |
| 100 g | 51 g | 14 g | 165 g |
| 200 g | 102 g | 28 g | 330 g |
| 300 g | 153 g | 42 g | 495 g |
| 500 g | 255 g | 70 g | 825 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 151 g → add voc agent to reach 165 g
🧮 Calculate any amount with this mixTips for using CC6500
How to read the ratio and weigh it
The mix for CC6500 is "Base 100 : Hardener 52 : VOC Agent 13 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 156 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
CC6500 works with 2 hardeners (AR7505, AR7506 Slow). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.
Pot life and how much to mix
Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for clearcoats
The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 26 g. Misreading the hardener by 1 g shifts the hardener amount by about 3.8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Clearcoats from other brands
FAQ
What is the mix ratio of CC6500?
with AR7505: Base 100 : Hardener 52 : VOC Agent 13 (by weight). with AR7506 Slow: Base 100 : Hardener 51 : VOC Agent 14 (by weight).
Which hardener and thinner does CC6500 use?
hardener AR7505, voc agent AZ9500. hardener AR7506 Slow, voc agent AZ9501.
How much hardener and thinner do I need for 100 g of CC6500?
AR7505: 52 g hardener, 13 g voc agent (165 g in total). AR7506 Slow: 51 g hardener, 14 g voc agent (165 g in total).
More Cromax Clearcoats
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site