GanemiX 🧮 Calculator

720 MS CLEAR Mix Ratio & HardenerKCC Clearcoat

720 MS CLEAR is a KCC (KCC) automotive refinish clearcoat. With hardener CA221, the mix ratio is Base 100 : Hardener 51 (by weight).

Mix ratio (by weight)

100 : 51
Base
720 MS CLEAR
Hardener
CA221
Thinner
None
Pot life
2h

Weight chart

BaseHardenerTotal
50 g25.5 g75.5 g
100 g51 g151 g
200 g102 g302 g
300 g153 g453 g
500 g255 g755 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 151 g

🧮 Calculate any amount with this mix

Tips for using 720 MS CLEAR

How to read the ratio and weigh it

The mix for 720 MS CLEAR is "Base 100 : Hardener 51 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 153 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 720 MS CLEAR is CA221. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 2h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 3.9%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 720 MS CLEAR?

with CA221: Base 100 : Hardener 51 (by weight).

Which hardener and thinner does 720 MS CLEAR use?

hardener CA221, no thinner.

How much hardener and thinner do I need for 100 g of 720 MS CLEAR?

CA221: 51 g hardener (151 g in total).

More KCC Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: KCC official site