LE2001/2004/2007 Mix Ratio & HardenerCromax Surfacer
LE2001/2004/2007 is a Cromax (Axalta) automotive refinish surfacer. You can choose from 2 hardeners. With hardener 256S/AK260, the mix ratio is Base 100 : Hardener 13 : Thinner 3 (by weight).
With hardener 256S/AK260
100 : 13 : 3- Base
- LE2001/2004/2007
- Hardener
- 256S/AK260
- Thinner
- XB387
- Pot life
- See the TDS
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 6.5 g | 1.5 g | 58 g |
| 100 g | 13 g | 3 g | 116 g |
| 200 g | 26 g | 6 g | 232 g |
| 300 g | 39 g | 9 g | 348 g |
| 500 g | 65 g | 15 g | 580 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 113 g → add thinner to reach 116 g
🧮 Calculate any amount with this mixWith hardener XK203/XK205/XK206
100 : 10 : 6- Base
- LE2001/2004/2007
- Hardener
- XK203/XK205/XK206
- Thinner
- XB387
- Pot life
- See the TDS
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 5 g | 3 g | 58 g |
| 100 g | 10 g | 6 g | 116 g |
| 200 g | 20 g | 12 g | 232 g |
| 300 g | 30 g | 18 g | 348 g |
| 500 g | 50 g | 30 g | 580 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 110 g → add thinner to reach 116 g
🧮 Calculate any amount with this mixTips for using LE2001/2004/2007
How to read the ratio and weigh it
The mix for LE2001/2004/2007 is "Base 100 : Hardener 13 : Thinner 3 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 39 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
LE2001/2004/2007 works with 2 hardeners (256S/AK260, XK203/XK205/XK206). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.
Pot life and how much to mix
Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 6.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 15.4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of LE2001/2004/2007?
with 256S/AK260: Base 100 : Hardener 13 : Thinner 3 (by weight). with XK203/XK205/XK206: Base 100 : Hardener 10 : Thinner 6 (by weight).
Which hardener and thinner does LE2001/2004/2007 use?
hardener 256S/AK260, thinner XB387. hardener XK203/XK205/XK206, thinner XB387.
How much hardener and thinner do I need for 100 g of LE2001/2004/2007?
256S/AK260: 13 g hardener, 3 g thinner (116 g in total). XK203/XK205/XK206: 10 g hardener, 6 g thinner (116 g in total).
More Cromax Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site