GanemiX 🧮 Calculator

33430S Mix Ratio & HardenerCromax Surfacer

33430S is a Cromax (Axalta) automotive refinish surfacer. With hardener 14301S/04S, the mix ratio is Base 100 : Hardener 25 : Thinner 25 (by weight).

Mix ratio (by weight)

100 : 25 : 25
Base
33430S
Hardener
14301S/04S
Thinner
14375S/85S
Pot life
21°C 30min-1h

Weight chart

BaseHardenerThinnerTotal
50 g12.5 g12.5 g75 g
100 g25 g25 g150 g
200 g50 g50 g300 g
300 g75 g75 g450 g
500 g125 g125 g750 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 150 g

🧮 Calculate any amount with this mix

Tips for using 33430S

How to read the ratio and weigh it

The mix for 33430S is "Base 100 : Hardener 25 : Thinner 25 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 75 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 33430S is 14301S/04S. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 21°C 30min-1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 12.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of 33430S?

with 14301S/04S: Base 100 : Hardener 25 : Thinner 25 (by weight).

Which hardener and thinner does 33430S use?

hardener 14301S/04S, thinner 14375S/85S.

How much hardener and thinner do I need for 100 g of 33430S?

14301S/04S: 25 g hardener, 25 g thinner (150 g in total).

More Cromax Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site