CC6400 Mix Ratio & HardenerCromax Clearcoat
CC6400 is a Cromax (Axalta) automotive refinish clearcoat. With hardener XK203/XK205/XK206, the mix ratio is Base 100 : Hardener 37 : Performance Agent 7 (by weight).
Mix ratio (by weight)
100 : 37 : 7- Base
- CC6400
- Hardener
- XK203/XK205/XK206
- Performance Agent
- AZ9100/AZ9101
- Pot life
- See the TDS
Weight chart
| Base | Hardener | Performance Agent | Total |
|---|---|---|---|
| 50 g | 18.5 g | 3.5 g | 72 g |
| 100 g | 37 g | 7 g | 144 g |
| 200 g | 74 g | 14 g | 288 g |
| 300 g | 111 g | 21 g | 432 g |
| 500 g | 185 g | 35 g | 720 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 137 g → add performance agent to reach 144 g
🧮 Calculate any amount with this mixTips for using CC6400
How to read the ratio and weigh it
The mix for CC6400 is "Base 100 : Hardener 37 : Performance Agent 7 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 111 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for CC6400 is XK203/XK205/XK206. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for clearcoats
The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 18.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Clearcoats from other brands
FAQ
What is the mix ratio of CC6400?
with XK203/XK205/XK206: Base 100 : Hardener 37 : Performance Agent 7 (by weight).
Which hardener and thinner does CC6400 use?
hardener XK203/XK205/XK206, performance agent AZ9100/AZ9101.
How much hardener and thinner do I need for 100 g of CC6400?
XK203/XK205/XK206: 37 g hardener, 7 g performance agent (144 g in total).
More Cromax Clearcoats
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site