GanemiX 🧮 Calculator

D8035 2K High Performance Primer Surfacer Mix Ratio & HardenerPPG Surfacer

D8035 2K High Performance Primer Surfacer is a PPG (PPG) automotive refinish surfacer. You can choose from 2 hardeners. With hardener 2K Chromatic Hardener (D8291), the mix ratio is Base 100 : Hardener 21 : Thinner 18 (by weight).

With hardener 2K Chromatic Hardener (D8291)

100 : 21 : 18
Base
D8035 2K High Performance Primer Surfacer
Hardener
2K Chromatic Hardener (D8291)
Thinner
D870/D871/D872/D873
Pot life
21°C 25-30min

Weight chart

BaseHardenerThinnerTotal
50 g10.5 g9 g69.5 g
100 g21 g18 g139 g
200 g42 g36 g278 g
300 g63 g54 g417 g
500 g105 g90 g695 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 121 g → add thinner to reach 139 g

🧮 Calculate any amount with this mix

With hardener 2K Undercoat Hardener High Temp (D8295)

100 : 21 : 18
Base
D8035 2K High Performance Primer Surfacer
Hardener
2K Undercoat Hardener High Temp (D8295)
Thinner
D870/D871/D872/D873
Pot life
32°C 15-20min

Weight chart

BaseHardenerThinnerTotal
50 g10.5 g9 g69.5 g
100 g21 g18 g139 g
200 g42 g36 g278 g
300 g63 g54 g417 g
500 g105 g90 g695 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 121 g → add thinner to reach 139 g

🧮 Calculate any amount with this mix

Tips for using D8035 2K High Performance Primer Surfacer

How to read the ratio and weigh it

The mix for D8035 2K High Performance Primer Surfacer is "Base 100 : Hardener 21 : Thinner 18 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 63 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

D8035 2K High Performance Primer Surfacer works with 2 hardeners (2K Chromatic Hardener (D8291), 2K Undercoat Hardener High Temp (D8295)). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.

Pot life and how much to mix

The pot life after mixing is about 21°C 25-30min, 32°C 15-20min. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 10.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 9.5%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of D8035 2K High Performance Primer Surfacer?

with 2K Chromatic Hardener (D8291): Base 100 : Hardener 21 : Thinner 18 (by weight). with 2K Undercoat Hardener High Temp (D8295): Base 100 : Hardener 21 : Thinner 18 (by weight).

Which hardener and thinner does D8035 2K High Performance Primer Surfacer use?

hardener 2K Chromatic Hardener (D8291), thinner D870/D871/D872/D873. hardener 2K Undercoat Hardener High Temp (D8295), thinner D870/D871/D872/D873.

How much hardener and thinner do I need for 100 g of D8035 2K High Performance Primer Surfacer?

2K Chromatic Hardener (D8291): 21 g hardener, 18 g thinner (139 g in total). 2K Undercoat Hardener High Temp (D8295): 21 g hardener, 18 g thinner (139 g in total).

More PPG Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: PPG Refinish official site