N2790 EPW Gloss Black Sealer Mix Ratio & HardenerPPG Surfacer
N2790 EPW Gloss Black Sealer is a PPG (PPG) automotive refinish surfacer. You can choose from 3 hardeners. With hardener EPW Standard Hardener, the mix ratio is Base 100 : Hardener 40 : Thinner 25 (by weight).
With hardener EPW Standard Hardener
100 : 40 : 25- Base
- N2790 EPW Gloss Black Sealer
- Hardener
- EPW Standard Hardener
- Thinner
- EPW Standard Reducer
- Pot life
- 20°C 2h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 20 g | 12.5 g | 82.5 g |
| 100 g | 40 g | 25 g | 165 g |
| 200 g | 80 g | 50 g | 330 g |
| 300 g | 120 g | 75 g | 495 g |
| 500 g | 200 g | 125 g | 825 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 140 g → add thinner to reach 165 g
🧮 Calculate any amount with this mixWith hardener EPW High Build Hardener
100 : 25 : 30- Base
- N2790 EPW Gloss Black Sealer
- Hardener
- EPW High Build Hardener
- Thinner
- EPW High Build Reducer
- Pot life
- 20°C 1.5h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 12.5 g | 15 g | 77.5 g |
| 100 g | 25 g | 30 g | 155 g |
| 200 g | 50 g | 60 g | 310 g |
| 300 g | 75 g | 90 g | 465 g |
| 500 g | 125 g | 150 g | 775 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 155 g
🧮 Calculate any amount with this mixWith hardener EPW Low VOC Hardener
100 : 25 : 15- Base
- N2790 EPW Gloss Black Sealer
- Hardener
- EPW Low VOC Hardener
- Thinner
- EPW Low VOC Reducer
- Pot life
- 20°C 1h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 12.5 g | 7.5 g | 70 g |
| 100 g | 25 g | 15 g | 140 g |
| 200 g | 50 g | 30 g | 280 g |
| 300 g | 75 g | 45 g | 420 g |
| 500 g | 125 g | 75 g | 700 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 140 g
🧮 Calculate any amount with this mixTips for using N2790 EPW Gloss Black Sealer
How to read the ratio and weigh it
The mix for N2790 EPW Gloss Black Sealer is "Base 100 : Hardener 40 : Thinner 25 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 120 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
N2790 EPW Gloss Black Sealer works with 3 hardeners (EPW Standard Hardener, EPW High Build Hardener, EPW Low VOC Hardener). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.
Pot life and how much to mix
The pot life after mixing is about 20°C 2h, 20°C 1.5h, 20°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 20 g. Misreading the hardener by 1 g shifts the hardener amount by about 5%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of N2790 EPW Gloss Black Sealer?
with EPW Standard Hardener: Base 100 : Hardener 40 : Thinner 25 (by weight). with EPW High Build Hardener: Base 100 : Hardener 25 : Thinner 30 (by weight). with EPW Low VOC Hardener: Base 100 : Hardener 25 : Thinner 15 (by weight).
Which hardener and thinner does N2790 EPW Gloss Black Sealer use?
hardener EPW Standard Hardener, thinner EPW Standard Reducer. hardener EPW High Build Hardener, thinner EPW High Build Reducer. hardener EPW Low VOC Hardener, thinner EPW Low VOC Reducer.
How much hardener and thinner do I need for 100 g of N2790 EPW Gloss Black Sealer?
EPW Standard Hardener: 40 g hardener, 25 g thinner (165 g in total). EPW High Build Hardener: 25 g hardener, 30 g thinner (155 g in total). EPW Low VOC Hardener: 25 g hardener, 15 g thinner (140 g in total).
More PPG Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: PPG Refinish official site