GanemiX 🧮 Calculator

N2805 2K White Sealer Mix Ratio & HardenerPPG Surfacer

N2805 2K White Sealer is a PPG (PPG) automotive refinish surfacer. With hardener HS446, the mix ratio is Base 100 : Hardener 25 : Thinner 20 (by weight).

Mix ratio (by weight)

100 : 25 : 20
Base
N2805 2K White Sealer
Hardener
HS446
Thinner
GPA311
Pot life
20°C 2h

Weight chart

BaseHardenerThinnerTotal
50 g12.5 g10 g72.5 g
100 g25 g20 g145 g
200 g50 g40 g290 g
300 g75 g60 g435 g
500 g125 g100 g725 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 145 g

🧮 Calculate any amount with this mix

Tips for using N2805 2K White Sealer

How to read the ratio and weigh it

The mix for N2805 2K White Sealer is "Base 100 : Hardener 25 : Thinner 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 75 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for N2805 2K White Sealer is HS446. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 2h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 12.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of N2805 2K White Sealer?

with HS446: Base 100 : Hardener 25 : Thinner 20 (by weight).

Which hardener and thinner does N2805 2K White Sealer use?

hardener HS446, thinner GPA311.

How much hardener and thinner do I need for 100 g of N2805 2K White Sealer?

HS446: 25 g hardener, 20 g thinner (145 g in total).

More PPG Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: PPG Refinish official site