GanemiX 🧮 Calculator

679S Mix Ratio & HardenerCromax Clearcoat

679S is a Cromax (Axalta) automotive refinish clearcoat. With hardener 256S/AK260/AK261, the mix ratio is Base 100 : Hardener 35 : Thinner 18 (by weight).

Mix ratio (by weight)

100 : 35 : 18
Base
679S
Hardener
256S/AK260/AK261
Thinner
AB380/XB383
Pot life
20°C 4h

Weight chart

BaseHardenerThinnerTotal
50 g17.5 g9 g76.5 g
100 g35 g18 g153 g
200 g70 g36 g306 g
300 g105 g54 g459 g
500 g175 g90 g765 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 135 g → add thinner to reach 153 g

🧮 Calculate any amount with this mix

Tips for using 679S

How to read the ratio and weigh it

The mix for 679S is "Base 100 : Hardener 35 : Thinner 18 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 105 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 679S is 256S/AK260/AK261. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 20°C 4h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 17.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.7%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 679S?

with 256S/AK260/AK261: Base 100 : Hardener 35 : Thinner 18 (by weight).

Which hardener and thinner does 679S use?

hardener 256S/AK260/AK261, thinner AB380/XB383.

How much hardener and thinner do I need for 100 g of 679S?

256S/AK260/AK261: 35 g hardener, 18 g thinner (153 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site