GanemiX 🧮 Calculator

CC6020 Mix Ratio & HardenerCromax Clearcoat

CC6020 is a Cromax (Axalta) automotive refinish clearcoat. With hardener XK304/XK306, the mix ratio is Base 100 : Hardener 26.6 : Matt Agent 9.1 (by weight).

Mix ratio (by weight)

100 : 26.6 : 9.1
Base
CC6020
Hardener
XK304/XK306
Matt Agent
AZ3375
Pot life
21°C 1h15m

Weight chart

BaseHardenerMatt AgentTotal
50 g13.3 g4.6 g67.9 g
100 g26.6 g9.1 g135.7 g
200 g53.2 g18.2 g271.4 g
300 g79.8 g27.3 g407.1 g
500 g133 g45.5 g678.5 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 126.6 g → add matt agent to reach 135.7 g

🧮 Calculate any amount with this mix

Tips for using CC6020

How to read the ratio and weigh it

The mix for CC6020 is "Base 100 : Hardener 26.6 : Matt Agent 9.1 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 79.8 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for CC6020 is XK304/XK306. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

The pot life after mixing is about 21°C 1h15m. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 13.3 g. Misreading the hardener by 1 g shifts the hardener amount by about 7.5%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of CC6020?

with XK304/XK306: Base 100 : Hardener 26.6 : Matt Agent 9.1 (by weight).

Which hardener and thinner does CC6020 use?

hardener XK304/XK306, matt agent AZ3375.

How much hardener and thinner do I need for 100 g of CC6020?

XK304/XK306: 26.6 g hardener, 9.1 g matt agent (135.7 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site