PS106x Mix Ratio & HardenerCromax Surfacer
PS106x is a Cromax (Axalta) automotive refinish surfacer. You can choose from 4 hardeners. With hardener XK203 Fast, the mix ratio is Base 100 : Hardener 14 : Thinner 7.5 (by weight).
With hardener XK203 Fast
100 : 14 : 7.5- Base
- PS106x
- Hardener
- XK203 Fast
- Thinner
- XB383/387
- Pot life
- 20°C 45min
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 7 g | 3.8 g | 60.8 g |
| 100 g | 14 g | 7.5 g | 121.5 g |
| 200 g | 28 g | 15 g | 243 g |
| 300 g | 42 g | 22.5 g | 364.5 g |
| 500 g | 70 g | 37.5 g | 607.5 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 114 g → add thinner to reach 121.5 g
🧮 Calculate any amount with this mixWith hardener XK205 Std
100 : 14 : 7.5- Base
- PS106x
- Hardener
- XK205 Std
- Thinner
- XB383/387
- Pot life
- 20°C 1h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 7 g | 3.8 g | 60.8 g |
| 100 g | 14 g | 7.5 g | 121.5 g |
| 200 g | 28 g | 15 g | 243 g |
| 300 g | 42 g | 22.5 g | 364.5 g |
| 500 g | 70 g | 37.5 g | 607.5 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 114 g → add thinner to reach 121.5 g
🧮 Calculate any amount with this mixWith hardener XK206 Slow
100 : 14 : 7.5- Base
- PS106x
- Hardener
- XK206 Slow
- Thinner
- XB383/387
- Pot life
- 20°C 1h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 7 g | 3.8 g | 60.8 g |
| 100 g | 14 g | 7.5 g | 121.5 g |
| 200 g | 28 g | 15 g | 243 g |
| 300 g | 42 g | 22.5 g | 364.5 g |
| 500 g | 70 g | 37.5 g | 607.5 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 114 g → add thinner to reach 121.5 g
🧮 Calculate any amount with this mixWith hardener Non-Sanding (XK205/206+AZ9032)
100 : 22- Base
- PS106x
- Hardener
- Non-Sanding (XK205/206+AZ9032)
- Thinner
- None
- Pot life
- 20°C 45min
Weight chart
| Base | Hardener | Total |
|---|---|---|
| 50 g | 11 g | 61 g |
| 100 g | 22 g | 122 g |
| 200 g | 44 g | 244 g |
| 300 g | 66 g | 366 g |
| 500 g | 110 g | 610 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 122 g
🧮 Calculate any amount with this mixTips for using PS106x
How to read the ratio and weigh it
The mix for PS106x is "Base 100 : Hardener 14 : Thinner 7.5 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 42 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
PS106x works with 4 hardeners (XK203 Fast, XK205 Std, XK206 Slow, Non-Sanding (XK205/206+AZ9032)). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.
Pot life and how much to mix
The pot life after mixing is about 20°C 45min, 20°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 7 g. Misreading the hardener by 1 g shifts the hardener amount by about 14.3%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of PS106x?
with XK203 Fast: Base 100 : Hardener 14 : Thinner 7.5 (by weight). with XK205 Std: Base 100 : Hardener 14 : Thinner 7.5 (by weight). with XK206 Slow: Base 100 : Hardener 14 : Thinner 7.5 (by weight). with Non-Sanding (XK205/206+AZ9032): Base 100 : Hardener 22 (by weight).
Which hardener and thinner does PS106x use?
hardener XK203 Fast, thinner XB383/387. hardener XK205 Std, thinner XB383/387. hardener XK206 Slow, thinner XB383/387. hardener Non-Sanding (XK205/206+AZ9032), no thinner.
How much hardener and thinner do I need for 100 g of PS106x?
XK203 Fast: 14 g hardener, 7.5 g thinner (121.5 g in total). XK205 Std: 14 g hardener, 7.5 g thinner (121.5 g in total). XK206 Slow: 14 g hardener, 7.5 g thinner (121.5 g in total). Non-Sanding (XK205/206+AZ9032): 22 g hardener (122 g in total).
More Cromax Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site