NS2601/04/07 Mix Ratio & HardenerCromax Surfacer
NS2601/04/07 is a Cromax (Axalta) automotive refinish surfacer. You can choose from 2 hardeners. With hardener 256S/AK260/AK261, the mix ratio is Base 100 : Hardener 25 : Thinner 20 (by weight).
With hardener 256S/AK260/AK261
100 : 25 : 20- Base
- NS2601/04/07
- Hardener
- 256S/AK260/AK261
- Thinner
- JAB380/385/JXB387
- Pot life
- 20°C 1h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 12.5 g | 10 g | 72.5 g |
| 100 g | 25 g | 20 g | 145 g |
| 200 g | 50 g | 40 g | 290 g |
| 300 g | 75 g | 60 g | 435 g |
| 500 g | 125 g | 100 g | 725 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 125 g → add thinner to reach 145 g
🧮 Calculate any amount with this mixWith hardener XK203/XK205/XK206
100 : 17 : 20- Base
- NS2601/04/07
- Hardener
- XK203/XK205/XK206
- Thinner
- JAB380/385/JXB387
- Pot life
- 20°C 1h
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 8.5 g | 10 g | 68.5 g |
| 100 g | 17 g | 20 g | 137 g |
| 200 g | 34 g | 40 g | 274 g |
| 300 g | 51 g | 60 g | 411 g |
| 500 g | 85 g | 100 g | 685 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 117 g → add thinner to reach 137 g
🧮 Calculate any amount with this mixTips for using NS2601/04/07
How to read the ratio and weigh it
The mix for NS2601/04/07 is "Base 100 : Hardener 25 : Thinner 20 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 75 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
NS2601/04/07 works with 2 hardeners (256S/AK260/AK261, XK203/XK205/XK206). You choose by temperature and working time, but follow the manufacturer's temperature recommendations in the technical data sheet. Changing the hardener can change the mix ratio, so always check the table above.
Pot life and how much to mix
The pot life after mixing is about 20°C 1h. It gets shorter as it gets warmer, so mix only what you can use within that time. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 12.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 8%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of NS2601/04/07?
with 256S/AK260/AK261: Base 100 : Hardener 25 : Thinner 20 (by weight). with XK203/XK205/XK206: Base 100 : Hardener 17 : Thinner 20 (by weight).
Which hardener and thinner does NS2601/04/07 use?
hardener 256S/AK260/AK261, thinner JAB380/385/JXB387. hardener XK203/XK205/XK206, thinner JAB380/385/JXB387.
How much hardener and thinner do I need for 100 g of NS2601/04/07?
256S/AK260/AK261: 25 g hardener, 20 g thinner (145 g in total). XK203/XK205/XK206: 17 g hardener, 20 g thinner (137 g in total).
More Cromax Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site