GanemiX 🧮 Calculator

840R Mix Ratio & HardenerCromax Surfacer

840R is a Cromax (Axalta) automotive refinish surfacer. With hardener 845R, the mix ratio is Base 100 : Hardener 50 : Thinner 15 (by weight).

Mix ratio (by weight)

100 : 50 : 15
Base
840R
Hardener
845R
Thinner
XB383/AU370
Pot life
See the TDS

Weight chart

BaseHardenerThinnerTotal
50 g25 g7.5 g82.5 g
100 g50 g15 g165 g
200 g100 g30 g330 g
300 g150 g45 g495 g
500 g250 g75 g825 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 150 g → add thinner to reach 165 g

🧮 Calculate any amount with this mix

Tips for using 840R

How to read the ratio and weigh it

The mix for 840R is "Base 100 : Hardener 50 : Thinner 15 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 150 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 840R is 845R. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for surfacers

The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 25 g. Misreading the hardener by 1 g shifts the hardener amount by about 4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Surfacers from other brands

FAQ

What is the mix ratio of 840R?

with 845R: Base 100 : Hardener 50 : Thinner 15 (by weight).

Which hardener and thinner does 840R use?

hardener 845R, thinner XB383/AU370.

How much hardener and thinner do I need for 100 g of 840R?

845R: 50 g hardener, 15 g thinner (165 g in total).

More Cromax Surfacers

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site