U7200 Mix Ratio & HardenerCromax Surfacer
U7200 is a Cromax (Axalta) automotive refinish surfacer. With hardener U7200 Hardener, the mix ratio is Base 100 : Hardener 18 : Thinner 15 (by weight).
Mix ratio (by weight)
100 : 18 : 15- Base
- U7200
- Hardener
- U7200 Hardener
- Thinner
- 2K Thinner
- Pot life
- See the TDS
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 9 g | 7.5 g | 66.5 g |
| 100 g | 18 g | 15 g | 133 g |
| 200 g | 36 g | 30 g | 266 g |
| 300 g | 54 g | 45 g | 399 g |
| 500 g | 90 g | 75 g | 665 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 118 g → add thinner to reach 133 g
🧮 Calculate any amount with this mixTips for using U7200
How to read the ratio and weigh it
The mix for U7200 is "Base 100 : Hardener 18 : Thinner 15 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 54 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for U7200 is U7200 Hardener. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for surfacers
The surfacer evens out the base and supports the finish on top. Let it dry fully before sanding, and pick a grit that leaves no scratches that will show later.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 9 g. Misreading the hardener by 1 g shifts the hardener amount by about 11.1%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Surfacers from other brands
FAQ
What is the mix ratio of U7200?
with U7200 Hardener: Base 100 : Hardener 18 : Thinner 15 (by weight).
Which hardener and thinner does U7200 use?
hardener U7200 Hardener, thinner 2K Thinner.
How much hardener and thinner do I need for 100 g of U7200?
U7200 Hardener: 18 g hardener, 15 g thinner (133 g in total).
More Cromax Surfacers
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site