GanemiX 🧮 Calculator

CC6300 Mix Ratio & HardenerCromax Clearcoat

CC6300 is a Cromax (Axalta) automotive refinish clearcoat. With hardener XK205/XK206, the mix ratio is Base 100 : Hardener 37 (by weight).

Mix ratio (by weight)

100 : 37
Base
CC6300
Hardener
XK205/XK206
Thinner
None
Pot life
See the TDS

Weight chart

BaseHardenerTotal
50 g18.5 g68.5 g
100 g37 g137 g
200 g74 g274 g
300 g111 g411 g
500 g185 g685 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 137 g

🧮 Calculate any amount with this mix

Tips for using CC6300

How to read the ratio and weigh it

The mix for CC6300 is "Base 100 : Hardener 37 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 111 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for CC6300 is XK205/XK206. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 18.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of CC6300?

with XK205/XK206: Base 100 : Hardener 37 (by weight).

Which hardener and thinner does CC6300 use?

hardener XK205/XK206, no thinner.

How much hardener and thinner do I need for 100 g of CC6300?

XK205/XK206: 37 g hardener (137 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site