72500S Mix Ratio & HardenerCromax Clearcoat
72500S is a Cromax (Axalta) automotive refinish clearcoat. With hardener 14304S/14305S, the mix ratio is Base 100 : Hardener 37 : Thinner 30 (by weight).
Mix ratio (by weight)
100 : 37 : 30- Base
- 72500S
- Hardener
- 14304S/14305S
- Thinner
- JAB380/385/JXB387
- Pot life
- See the TDS
Weight chart
| Base | Hardener | Thinner | Total |
|---|---|---|---|
| 50 g | 18.5 g | 15 g | 83.5 g |
| 100 g | 37 g | 30 g | 167 g |
| 200 g | 74 g | 60 g | 334 g |
| 300 g | 111 g | 90 g | 501 g |
| 500 g | 185 g | 150 g | 835 g |
Scale readings (for 100 g of base): base 100 g → add hardener to reach 137 g → add thinner to reach 167 g
🧮 Calculate any amount with this mixTips for using 72500S
How to read the ratio and weigh it
The mix for 72500S is "Base 100 : Hardener 37 : Thinner 30 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 111 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).
Choosing a hardener
The hardener for 72500S is 14304S/14305S. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.
Pot life and how much to mix
Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.
Tips for clearcoats
The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.
Avoiding weighing mistakes
The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 18.5 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.4%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.
Clearcoats from other brands
FAQ
What is the mix ratio of 72500S?
with 14304S/14305S: Base 100 : Hardener 37 : Thinner 30 (by weight).
Which hardener and thinner does 72500S use?
hardener 14304S/14305S, thinner JAB380/385/JXB387.
How much hardener and thinner do I need for 100 g of 72500S?
14304S/14305S: 37 g hardener, 30 g thinner (167 g in total).
More Cromax Clearcoats
Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site