GanemiX 🧮 Calculator

3750S Mix Ratio & HardenerCromax Clearcoat

3750S is a Cromax (Axalta) automotive refinish clearcoat. With hardener XK203/XK205/XK206, the mix ratio is Base 100 : Hardener 36 : Thinner 12 (by weight).

Mix ratio (by weight)

100 : 36 : 12
Base
3750S
Hardener
XK203/XK205/XK206
Thinner
431R/JXB387
Pot life
See the TDS

Weight chart

BaseHardenerThinnerTotal
50 g18 g6 g74 g
100 g36 g12 g148 g
200 g72 g24 g296 g
300 g108 g36 g444 g
500 g180 g60 g740 g

Scale readings (for 100 g of base): base 100 g → add hardener to reach 136 g → add thinner to reach 148 g

🧮 Calculate any amount with this mix

Tips for using 3750S

How to read the ratio and weigh it

The mix for 3750S is "Base 100 : Hardener 36 : Thinner 12 (by weight)". The numbers on this page are weight ratios in grams. For example, if you weigh 300 g of base, the hardener is 108 g. Put the cup on the scale and zero it, add the base, then add the hardener while watching the scale. For the second and later components, do not zero the cup again; read the scale as a running total (see the "scale reading" line above).

Choosing a hardener

The hardener for 3750S is XK203/XK205/XK206. Some systems let you choose fast, standard or slow hardeners by temperature, so check the manufacturer's temperature recommendations in the data sheet.

Pot life and how much to mix

Check the technical data sheet (TDS) for the pot life. Once the hardener is in, curing keeps going, so do not reuse leftover paint; dispose of it promptly.

Tips for clearcoats

The clearcoat sets the gloss and depth of the finish. Respect the flash-off time between coats and watch for dust and runs. Several thin coats are safer than one heavy coat.

Avoiding weighing mistakes

The smaller the batch, the more a small error matters. For 50 g of base, the hardener is 18 g. Misreading the hardener by 1 g shifts the hardener amount by about 5.6%. Use a scale that reads 0.1 g, and if you add too much, do not top up the others by eye; recalculate the whole batch or start again.

Clearcoats from other brands

FAQ

What is the mix ratio of 3750S?

with XK203/XK205/XK206: Base 100 : Hardener 36 : Thinner 12 (by weight).

Which hardener and thinner does 3750S use?

hardener XK203/XK205/XK206, thinner 431R/JXB387.

How much hardener and thinner do I need for 100 g of 3750S?

XK203/XK205/XK206: 36 g hardener, 12 g thinner (148 g in total).

More Cromax Clearcoats

Mix ratios are converted from the manufacturer's technical data sheet (TDS) into weight ratios you can measure on a scale. Products are reformulated from time to time, so always check the latest TDS before you mix. Product information: Cromax official site